Google Pixel 10 owners finally get native magnetic wireless charging at 15W (25W on the Pro XL), and the accessories that snap on best right now are not Google’s own. They are Anker’s MagGo pieces, long sold beside iPhones.
BGR recently listed five that make the most sense. The deeper point is simpler: once PixelSnap magnets arrived, the mature MagGo catalog became the default daily kit for power, car mounts, wall bricks, earbuds and photo dumps.
Why PixelSnap suddenly makes MagGo gear feel native
Pixel 10, Pixel 10 Pro and Pixel 10 Pro Fold charge wirelessly at up to 15W on Pixel 10 and Pro with any Qi2-certified pad. The Pro XL reaches 25W. The magnets align the coils automatically, the same Magnetic Power Profile the Qi2 Magnetic Power Profile standard borrowed from Apple’s MagSafe.
That single hardware decision means cases without magnets or metal plates are optional. Anker’s MagGo power banks, car mounts and adapters snap straight to the bare phone or a thin Qi2 case. No rings, no adhesive disks. Google still sells first-party Pixelsnap chargers, yet third-party options already cover more jobs at lower prices.
Many MagGo boxes still show iPhone photos. On a Pixel 10 the magnets and 15W ceiling behave the same. That marketing lag is why the lineup feels like a sleeper win for Android owners.
The slim 10K MagGo bank that lives in a pocket
Anker MagGo Power Bank (10K, Slim) is the piece most Pixel 10 buyers will reach for first. Capacity is 10,000 mAh. Wireless output hits the full 15W Qi2 rate. Wired USB-C runs at 30W in or out. Thickness is just 14.7 mm and weight is about 200 g, roughly 25 percent thinner than Anker’s earlier 10K MagGo model.
Snap it on the back and Instant Connect starts charging without a button press. Four LEDs give a rough charge reading. The silicone face grips well but collects lint. There is no kickstand, so upright viewing needs a separate stand or careful placement. On sale it often sits near $75, cheaper than many branded magnetic packs with less capacity.
It also charges other Qi2 phones or, via cable, almost anything with USB-C. For days away from outlets it covers one and a half full Pixel charges wirelessly or faster top-ups over cable.
- 10,000 mAh total capacity, roughly 1.8 iPhone 15 Pro charges in lab tests
- 15W Qi2 wireless and 30W USB-C wired
- 14.7 mm thick, 200 g, metal band edge
- Four colorways including Black Stone and Aurora White
After the list, the bank’s real advantage is simply that it already exists at scale while Google’s own magnetic power options remain limited.
A car mount that charges and rotates without a case
The Anker Nano Wireless Car Charger (Magnetic, Detachable Pad) mounts to the dash or console with 3M adhesive and a memory-alloy arm. The pad itself is Qi2 15W and pulls free so you can keep charging at a desk or hotel later. 360-degree rotation and 45-degree tilt cover navigation and media angles.
Because the Pixel 10 already carries the magnet ring, no extra plate is required. Anker rates the hold for rough roads and includes a 25W car adapter plus cable in the box. Current price is $59.99 before membership discounts. The pad’s magnets follow Qi2 limits, so thick metal cases or card wallets will still block a solid snap.
For anyone who uses the phone as a GPS all day, the combination of secure mount and full-speed wireless charging removes the usual cable dance. The detachable design is the detail that separates it from fixed car chargers.
The compact wall brick Pixel 10 never shipped with
Google still ships Pixel phones without a charger. The Anker 735 (Nano II 65W) fills that gap with two USB-C ports and one USB-A in a GaN II body smaller than many 30W bricks. Single-port output reaches 65W. PPS support matches the protocol Pixel 10 uses for optimized wired fast charging.
Port power splits when more than one device is plugged in:
| Ports in use | USB-C1 | USB-C2 | USB-A |
|---|---|---|---|
| One | 65W | 65W | 22.5W |
| Two (C+C) | 45W | 20W | – |
| Two (C+A) | 40W | – | 22.5W |
| Three | 40W | 12W | 12W |
Dimensions are 1.5 × 1.15 × 2.6 inches. Street price hovers around $29.99. It will charge a Pixel 10 at full wired speed and still leave headroom for a tablet or laptop on the second C port. Foldable prongs make it easy to pack. For multi-device households this single brick replaces the pile of single-port adapters most people accumulate.
Liberty 5 buds that pair like they belong on Pixel
Anker’s audio brand Soundcore ships the Liberty 5 with Google Fast Pair and Find Hub support. Open the case near a Pixel 10 and the pairing card appears instantly. Adaptive ANC 3.0 recalibrates every 0.3 seconds. LDAC high-res audio works alongside multipoint. Battery life is rated 12 hours in the buds and 48 hours with the case (ANC off); 10 minutes of charge returns about 5 hours.
Drivers are 9.2 mm wool-paper. Six mics handle calls. Physical stem controls feel more precise than pure touch. Wear detection pauses music when you pull a bud out. IP55 rating covers sweat and light rain. Price is $129.99.
These are not Pixel Buds, yet the software hooks make them feel closer to the Google ecosystem than most third-party options. For owners who want strong ANC and long battery without paying flagship bud prices, the Liberty 5 lands in a sweet spot.
- 12 / 48 hours playtime (ANC off)
- Adaptive ANC 3.0 and Dolby Audio
- Google Fast Pair plus Find Hub
- LDAC + multipoint at the same time
The buds round out the kit beyond pure power accessories and give Pixel 10 owners an audio option that actually uses the phone’s Android strengths.
Magnetic card reader for dumping photos mid-shoot
Pixel cameras still produce large RAW and 4K files. The Anker MagGo USB-C Adapter (SD/TF card reader) snaps magnetically to the back and uses a short flat cable into the USB-C port. SD and microSD 4.0 slots claim up to 312 MB/s over a 10 Gbps link. A pass-through USB-C port keeps the phone charging at up to 42.5W while you transfer.
Anker markets it mainly for iPhone 15 and 16, but the magnets are the same Qi2/MagSafe ring the Pixel 10 uses, so the hold is identical. Weight is 44 g. Price is $24.99. It does not support PPS on the pass-through port, yet for photo and video dumps the speed and magnetic convenience matter more.
Photographers who shoot all day can offload cards without hunting for a laptop dongle or draining the phone battery. That use case is why it belongs on a short list of Pixel 10 essentials even though the box art shows an iPhone.
How the five pieces cover a full day
BGR chose the set because each item leans on PixelSnap magnets, Qi2, PPS or Google software hooks without overlapping functions. The table below shows the practical spread.
| Gadget | Key spec | Typical price | Main job |
|---|---|---|---|
| MagGo 10K Slim | 10,000 mAh, 15W Qi2 / 30W wired | ~$75 | All-day portable power |
| Nano car charger | 15W Qi2, detachable pad | $59.99 | Mounted navigation and charging |
| 735 wall charger | 65W GaN, 3 ports, PPS | $29.99 | Home and travel brick |
| Liberty 5 | 12/48 h, Fast Pair, ANC 3.0 | $129.99 | Wireless audio |
| MagGo SD adapter | 312 MB/s, 42.5W pass-through | $24.99 | Photo and video offload |
Together they cost less than many single flagship accessories and cover the gaps Pixel 10 leaves open: no in-box charger, desire for magnetic power, car use, better buds, and fast card access. Owners who already care about Pixel exclusive software features can now match them with hardware that behaves as if it were designed for the phone.
Recent recent Pixel 10 price drops make the phone itself more accessible; the Anker kit keeps the total ownership cost from climbing again.
Frequently Asked Questions
Do Anker MagGo accessories work on Pixel 10 without a special case?
Yes. Pixel 10 series phones include the Qi2 magnet array built in, so MagGo power banks, car pads and the card reader snap directly to the bare glass or any thin Qi2-compatible case. Thick metal or non-magnetic cases still interfere.
What is the maximum wireless charging speed for Pixel 10 with Anker MagGo gear?
Base Pixel 10, Pro and Pro Fold top out at 15W Qi2 with any certified pad including Anker’s. The Pro XL can hit 25W, but only with Google’s higher-power Pixelsnap charger and a sufficiently strong wall adapter; MagGo units stay at the 15W Qi2 ceiling.
Does the Anker 735 support the PPS protocol Pixel 10 prefers?
Yes. The 735 Nano II 65W explicitly lists PPS support, which lets the Pixel negotiate optimal voltage and current for its fastest wired rates. Many generic high-wattage chargers omit PPS and therefore charge slower than their label suggests.
Can the Soundcore Liberty 5 use Google Find Hub if lost?
Yes. Liberty 5 supports Google’s Find Hub network in addition to Fast Pair, so a misplaced bud or case can trigger location alerts through the same system Pixel owners already use for other trackers.
Will the MagGo USB-C card reader keep the Pixel 10 charged while transferring files?
Yes. Its pass-through port accepts up to 42.5W PD input so the phone can charge and transfer at the same time. Note that the pass-through path does not support PPS, only standard PD.
The five Anker pieces turn PixelSnap from a nice spec into a working daily system. That is the quiet shift most roundups skip.
